# Why is my iPhone compass wrong?

> A magnet in your case, a car, or the wrong north setting. How to find which one is throwing off your iPhone compass, fix it, and check it against a landmark.

Source: https://mountainidentifier.org/guides/why-is-my-iphone-compass-wrong
Last updated: 2026-10-14

**An iPhone compass is usually wrong for one of three reasons: something magnetic nearby (a MagSafe case or wallet, a car, a steel railing), a calibration that has drifted, or the north setting. Take off any magnetic accessory, step away from metal, move the phone in a slow figure eight, and check that Compass Calibration and Location Services are on. Then test it against a landmark you know.**

## How the iPhone compass works, and why it drifts

Your iPhone finds north with a magnetometer, a small sensor that measures the Earth's magnetic field. That field is weak, so anything magnetic near the phone bends the reading. Apple's own guide to the Compass app says its accuracy [can be affected by magnetic or environmental interference](https://support.apple.com/guide/iphone/compass-iph1ac0b663/ios), and its support page on compass accuracy for its watch puts it more bluntly: ["The presence of magnets can affect the accuracy of any compass sensor."](https://support.apple.com/en-us/105073)

Calibration is how the phone learns to subtract the magnetism it carries around with it, from its own parts and whatever is attached to it. When that changes (you snap on a new case, or put the phone in a car mount), the old correction is wrong until the phone relearns it. Until then, every heading is off by roughly the same angle.

A few degrees matters more than it sounds. A one-degree error moves your line of sight about 17 m sideways for every kilometer. Point at a mountain 30 km away with the compass 5 degrees out and you're aiming roughly 2.6 km to one side, which is often a different summit.

## Find the cause in two minutes

Stand outside, away from cars and metal, and pick something you can see and find on a map: a summit, a radio mast, the end of a straight road. Open the Compass app, point the top of the phone at it, and note the heading. Then:

1. **Take off the case and anything stuck to the back.** MagSafe wallets, grips, rings and battery packs all carry magnets. Point at the same landmark again. If the heading moves by more than a couple of degrees, you've found it.
2. **Move a few steps.** Steel railings, rebar in a concrete viewing platform, a parked car or a power line can each bend the field over a small area. If the heading changes as you walk a few meters, the ground you're standing on is the problem, not the phone.
3. **Check the north setting.** If the phone is consistently off by the same amount everywhere you go, compare it with your local magnetic declination from [NOAA's declination calculator](https://www.ngdc.noaa.gov/geomag/calculators/magcalc.shtml). An error that matches the declination means you're reading magnetic north where you wanted true north, or the reverse.

## How to fix it

1. **Remove magnetic accessories** while you take a bearing, or use a case without magnets on days you need the compass.
2. **Recalibrate by moving the phone.** Hold it away from your body and trace a slow figure eight in the air, tilting and turning the phone as you go, for ten or fifteen seconds. If the Compass app shows a calibration prompt, follow it.
3. **Turn on Compass Calibration.** It's in Settings > Privacy & Security > Location Services > System Services. It's the setting the phone uses to keep its compass calibrated in the background, so leave it on.
4. **Leave Location Services on.** True north depends on knowing where you are: the phone works out your declination from a built-in magnetic model, the [World Magnetic Model](https://www.ncei.noaa.gov/products/world-magnetic-model) that NOAA says ships on iOS and Android devices. No location, no correction.
5. **Choose the north you mean.** On recent iOS the switch is in Settings > Apps > Compass > Use True North. Leave it on for maps and for any app that labels things on the horizon. Turning it off changes the reference; it doesn't repair a bad reading, whatever some guides suggest.
6. **Restart the phone** if the reading is stuck or spinning, then repeat the figure eight outdoors. If a bare phone in an open field is still badly out after all of this, contact Apple Support, because the sensor itself may be faulty.

## Checking it against the sun

If there's no landmark in view, use the sun. At local solar noon, midway between sunrise and sunset (rarely 12:00 on the clock), the sun is due south from anywhere in the Northern Hemisphere outside the tropics, and due north from the matching part of the Southern Hemisphere. Don't look at the sun. Your shadow does the same job: at solar noon in the north it points due north. It's a rough check, but it'll catch a phone that's 20 degrees out.

## Why it matters for mountain apps

Any app that draws labels over the camera view, for stars or for peaks, leans on the compass to know which way you're facing. When the compass is out, the labels slide sideways together and sit over the wrong summits. It's a common reason a peak app seems to have named the wrong mountain, and worth ruling out before you blame the map data. If you're still learning the skyline, our guide to [working out what mountain you're looking at](https://mountainidentifier.org/guides/what-mountain-is-this) covers the other clues: shape, snow and distance.

## Lining up the labels in Mountain Identifier: Peaks

Mountain Identifier: Peaks uses one GPS fix and the compass to set north, then tracks the phone's movement with ARKit. If the compass is out, every flag is shifted by the same angle. Pick a peak you're sure of and drag one finger sideways across the screen: all the labels rotate together until that flag sits on its summit, and the rest fall into line with it. The live camera view is part of the Pro subscription.

The [app overview](https://mountainidentifier.org/guides/mountain-identifier-app) covers what's free and what isn't, and [identifying peaks without signal](https://mountainidentifier.org/guides/identifying-peaks-without-signal) explains what works once you're out of coverage.

### Where is compass calibration on iPhone?

Go to Settings, then Privacy & Security, then Location Services, then System Services, and turn on Compass Calibration. There's no button that runs a calibration on demand. The phone recalibrates as you move it, which is why a slow figure eight helps.

### Does a magnetic case affect the iPhone compass?

It can. The compass measures the Earth's magnetic field, which is weak, and a magnet a few millimeters from the sensor can swamp it. Point the phone at a fixed landmark with the case on and off. If the heading jumps, the case is the problem.

### Should I use true north or magnetic north?

Use true north for maps and apps, since maps are drawn to true north. Use magnetic north only to match a baseplate compass that hasn't been adjusted for declination. Turning true north off doesn't fix a bad reading; it just changes which north you see.

### Why does my iPhone compass point the wrong way in the car?

A car is a steel box full of motors and speakers, and a phone mount often holds the phone with a magnet. Inside, the compass can be badly out. While you drive, map apps can take your direction from GPS movement instead, so check the compass outside the car.

---

Peak data (c) OpenStreetMap contributors, licensed ODbL.

Mountain Identifier: Peaks is an iOS app by Patrick Tammaro. Free to download; identifying peaks is part of the Pro subscription. App Store: https://apps.apple.com/us/app/mountain-identifier-peaks/id6752865266
